Security Menu - Xycom XVME-653 Manual

XVME-653/658 Manual

Security Menu

This menu prompts you for the new system password and requires you to verify the
password by entering it again. The password can be used to stop access to the setup
menus or prevent unauthorized booting of the unit. The supervisor password can also be
used to change the user password.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
Supervisor Password is
User Password is
Set Supervisor Password
Set User Password
Password on boot:
Diskette access:
Fixed disk boot sector:
System backup reminder:
Virus check reminder:
↑↓
F1 Help
←→ Select Menu
ESC Exit
Option
Supervisor Password
Set User Password
Password on Boot
Diskette Access
Fixed Disk Boot Sector
System Backup Reminder/Virus
Check Reminder
3-14
Advanced Security
Disabled
Disabled
[Press Enter]
Press Enter
[Disabled]
[Supervisor]
[Normal]
[Disabled]
[Disabled]
Select Item -/+
Enter Select & Submenu
Figure 3-11 Security Menu
Table 3-11 Security Menu Options
Description
Provides full access to Setup menus. You may use up to seven alphanu-
meric characters. This option is disabled by setting it to [CR] or Nothing.
Provides restricted access to Setup menus. It requires the prior setting of
Supervisor password. You may use up to seven alphanumeric characters.
If the supervisor password is set and this option is Disabled, BIOS assumes
the user is booting.
Restricts access to floppy drives to the supervisor when set to Supervisor.
Requires setting the Supervisor password.
Write protects the disk boot sector to help prevent viruses.
Displays a message during boot up asking if you have backed up the system
or scanned it for viruses (Y/N). The message returns on each boot until you
respond Y. It displays the message Daily (on the first boot of the day),
Weekly (on the first boot after Sunday), or Monthly (on the first boot of the
month). The default is Disabled.
VMEbus Exit
If the line item you are viewing
has specific help, it will be listed
here.
Change Values
Item Specific Help
F9 Setup Defaults
F10 Previous Values