First Cleaning; First Start - Tesla RoboStar T50 Manual

Remote control
Charging station

FIRST CLEANING


Remove all obstacles that can prevent effective cleaning.
 Also remove objects that can damage the robotic vacuum cleaner.
 The carpet must be secured so the robot cannot get on it when mopping. If the mopping pad
with the water container is installed on the vacuum cleaner, it may interrupt the cleaning process
or cause unwanted soaking of the carpet.

Direct sunlight may cause a reduced sensitivity of the infrared sensors of the vacuum cleaner,
please avoid direct sunlight light.
 Black furniture may not be properly detected due to the physical nature of infrared sensors. This
may cause a slight impact, which will be reduced by the front bumper.
 The top of the vacuum cleaner is tempered glass. Although toughened glass is safer and stronger
than standard glass, please handle it carefully so as not to scratch or break it.
CLEANING MODE - AUTOMATIC CLEANING

FIRST START

1. This is the most common way of cleaning.
2. Insert the batteries into the remote control, make sure the polarity is correct.
1 Schedule time
2 Current time
3 Direction button
4 Scheduled (deferred) cleaning
5 Spot cleaning
6 Return to charging station
7
Start of cleaning/Pause
8 Increased suction power for deep cleaning
9 Time setting
10 Cleaning along the walls
1 Power indicator
2 230 V power adaptor
3 230 V power adaptor port connector
4 Charging pins