Remote Control - Tesla RoboStar T50 Manual

12. The vacuum cleaner starts cleaning automatically until the battery is almost empty, then the
vacuum cleaner automatically searches for the charging station and starts charging the battery.
13. To stop/pause the vacuum cleaner, press the "AUTO" button on the top of the appliance or the
"7" button on the remote control.
14. If the vacuum cleaner is stopped for more than 45 seconds, it automatically switches to "Sleep"
mode to save the battery. The "AUTO" button on the robot will not blink and the buttons on the
remote control will not respond. To wake up the vacuum cleaner press the "AUTO" button on
the top of the device or push button "7" on remote control.

REMOTE CONTROL

1. The "AUTO" (2) button
 Start/Pause the operation
2. Directional buttons (5) and "MAX" button
Button : to increase the time value for the schedule cleaning and time setting
Button : a directional button to move forward
Button „MAX" : to decrease the time value for the schedule cleaning and time setting
Button „MAX" : a directional button to move backward
Button : to switch from setting the minutes to setting the hours for a schedule cleaning
and time setting
Button : a directional button to move to the left
Button : to switch from setting the hours to setting the minutes for a schedule cleaning
and time setting
Button : a directional button to move to the right
3. The "PLAN" (4) button
 Enter the "Schedule Cleaning" mode, use the directional buttons at the top half of the
remote control display (HH: MM) to set the start for the schedule cleaning.
 Push the button again to confirm the "Scheduled Cleaning".
4. The "CLOCK" (9) button
 Enter the "Time Setting" mode, use the directional buttons (HH: MM).

Push the button again to confirm the set time.
5. The "HOME" (6) button

Push to command the vacuum cleaner to search for the charging station and start
charging.
6. The "SPOT" (5) button
 Push to command the vacuum cleaner to start cleaning in circles - targeted cleaning.