Application Troubleshooting; First Use - Tesla RoboStar iQ700 Manual

•
Enable all the permissions that the application requires:
ANDROID - enable the "Location" and "Nearby Devices" permissions.
APPLE - enable the "Location", "Bluetooth" and "Local network" permissions.
•
Switch on the robot vacuum cleaner using the main switch "3".
•
After logging into the "Smart Life" app, click on the "+" icon on the top right and then click on "Add
Device".
•
Select your "Vacuum cleaner (Wi-Fi)" device in "Small Home Appliances".
•
Enter the password for your Wi-Fi network to which you are connected and hold the "4" button on
the robot vacuum cleaner for 5 seconds.
•
The illuminated edge of the buttons on the robot vacuum cleaner will flash, click "Next" and "Reset
the device" will appear on the display. Click "Next" (only applies to Android version, on iOS click
"Confirmation light flashes"), the connection method will be displayed, click "AP Mode" and then
click "Connect".
•
Switch to the Wi-Fi network settings and click on the Wi-Fi network "SmartLife", after connecting
to this Wi-Fi network, return to the app with the "Back" button and the robot vacuum cleaner will
start connecting to the app.
•
After successful pairing, a green icon will appear next to the name and your
"TESLA RoboStar iQ700" robot vacuum cleaner has been successfully added to the app.
•
Click on "Done", it is now possible to control the selected functions of the robot vacuum cleaner
with your smartphone.
With the software-intensive nature of the operating system and Google/Apple's requirements for
application security, it is necessary to periodically adjust application functionality. Also keep your
phone's operating system updated to the latest version. The app requires Android 10 or higher,
otherwise its functionality cannot be guaranteed. The app is constantly evolving and features may be
changed, added or removed at any time.

APPLICATION TROUBLESHOOTING

•
Make sure the Wi-Fi coverage for your smartphone and robot vacuum cleaner is good and strong
enough. The first time you set up your robot vacuum cleaner, do so near your Wi-Fi router.
•
Make sure "Location" (GPS) is enabled on your smartphone.
•
Make sure the third-party app (VPN, antivirus, firewall, etc.) is not blocking access to your
smartphone.
•
Try connecting to a different Wi-Fi router or Wi-Fi hotspot on a different smartphone to rule out an
error on your internet connection.
•
You have too many devices connected to your Wi-Fi router, or a new device is blocked from
connecting to it.
•
Reset your Wi-Fi router.
Note: Make sure the charging station is within range of a good, strong Wi-Fi signal so it can connect to
a Wi-Fi network while charging. The robotic vacuum cleaner also needs this Wi-Fi connection while it is
charging so that it is properly oriented and available to start cleaning. A Wi-Fi network operating at
2.4 GHz and WPA1 or WPA2 security is supported.

FIRST USE

During the first cleaning, the TESLA robotic vacuum cleaner maps the room and saves a map of the