Table of Contents
Advertisement
Available languages
Available languages
3.
Connect the charging station to an electrical outlet with a 230 V power adapter.
There must be no obstacles within 2 meters in front and
1 meter on the sides from the charging station. The
charging station must be placed on a flat surface, we
also recommend to fix the station to the wall or floor
with a double-sided adhesive tape. Place the power cord
so it does not get entangle in the cleaning brushes of
the vacuum cleaner.
A mirror or other objects with strong reflection can not
be placed in the area of the charging base 15 cm above
the ground. The base should not be exposed to direct
sunlight.
4.
Place the vacuum cleaner in the charging station.
5.
The vacuum cleaner battery will start charging automatically.
6.
While charging, the "AUTO" button blinks orange colour, while the battery is fully charged, the
"AUTO" button lights up in a green color.
7.
Before putting the vacuum cleaner into operation, prepare the room so there are no objects on
the floor that may prevent the vacuum cleaner to operate properly (bigger sheets of paper, cables,
stickers, small items, inappropriately placed carpet, etc.).
8.
Remove the chairs and other larger items so the vacuum cleaner can easily reach inaccessible
places.
9.
Switch the ON/OFF button („2") on the on the vacuum cleaner to the ON "
10. Press the "AUTO" button on the vacuum cleaner or on the remote control button "7" to place the
unit in "Standby mode".
11. To start up, press again the "AUTO" button on the top of the device or the button "7" on the
remote control.
Turn ON
switch the switch to ON ( I ), the "AUTO" button
on the vacuum cleaner lights up in green.
Turn OFF
switch the switch to OFF (
o
).
o
" position."
Advertisement
Table of Contents
