First Cleaning - Tesla RoboStar iQ500 User Manual

LED indicator (A)
7. How to operate and all advanced features of the robotic vacuum cleaner are described in the application (Settings > Help). Install an
application on your smartphone for connection between your smartphone and robotic vacuum cleaner.
Android: search for "TESLA RoboStar iQ500" in Google Play or download it directly at:
Apple: search for "TESLA RoboStar iQ500" in Apple Store
8. For WiFi connection, enable WiFi, Bluetooth and GPS in your smartphone for the first pairing.
9. Make sure the WiFi signal coverage for your smartphone and robotic vacuum cleaner is good and strong enough. If possible, perform the
first setup of the robotic vacuum cleaner near your WiFi router.
10. If you cannot connect to a robotic vacuum cleaner by smartphone to change the password or router settings, reset the WiFi in the robotic
vacuum cleaner and pair it with your smartphone again.
11. Reset of robotic vacuum cleaner:
Press the button and
12. To start the cleaning, push the front panel button
cleaning.

FIRST CLEANING

 Remove all obstacles that can prevent effective cleaning.

Also remove objects that can damage the robotic vacuum cleaner.
 The carpet must be secured so the robot cannot get on it when mopping. If the mopping pad is installed on the vacuum cleaner, it may
interrupt the cleaning process or cause unwanted soaking of the carpet.
White color: battery charge level is higher than 20%
Red color: battery charge level is less than 20%
Slow blinking: battery is charging
Red colour, blinking: error
on the top panel at the same time for 3 seconds, then the blue LED will start to flash slowly.
or start cleaning in the smartphone application. The vacuum cleaner starts its first
www.tesla-electronics.eu/tesla-robostar-iq500-detail