First Cleaning; First Start - Tesla RoboStar T60 User Manual

Charging station

FIRST CLEANING


Remove all obstacles that can prevent effective cleaning.

Also remove objects that can damage the robotic vacuum cleaner.
 The carpet must be secured so the robot cannot get on it when mopping. If the mopping pad
with the water container is installed on the vacuum cleaner, it may interrupt the cleaning
process or cause unwanted soaking of the carpet.

Direct sunlight may cause a reduced sensitivity of the infrared sensors of the vacuum cleaner,
please avoid direct sunlight light.

Black furniture may not be properly detected due to the physical nature of infrared sensors.
This may cause a slight impact, which will be reduced by the front bumper.
 The top of the vacuum cleaner is tempered glass. Although toughened glass is safer and
stronger than standard glass, please handle it carefully so as not to scratch or break it.
CLEANING MODE - SMART CLEANING

FIRST START

1. This is the most common way of cleaning. The device uses advanced gyroscopic navigation and
moves along a cleaning route that is optimized for the best floor cleaning.
2 Press the "AUTO" button on the top of robot vacuum or the number "7" on the remote control.
3 When activating „SMART" cleaning, the vacuum cleaner should always be in the charging station.
4 Insert the batteries into the remote control, make sure the polarity is correct.
5 Connect the charging station to an electrical outlet with a 230 V power adapter.
Ideal location of the charging base
There must be no obstacles within 2 meters in front and 1
meter on the sides from the charging station. The charging
station must be placed on a flat surface, we also recommend
to fix the station to the wall or floor with a double-sided
adhesive tape. Place the power cord so it does not get entangle
in the cleaning brushes of the vacuum cleaner.
A mirror or other objects with strong reflection can not be
placed in the area of the charging base 15 cm above the
ground. The base should not be exposed to direct sunlight.
1 Power indicator
2 230 V power adaptor
3 230 V power adaptor port connector
4 Charging pins