Emptying The Dust Tank; Cleaning The Hepa Filter - Tesla PureStar E70 Aqua Pro Manual

2.
If the Battery status indicator (6) flashes, the battery is flat - charge it immediately.
3.
4.
Use the On/Off button to turn on the device. You can switch between MIN or MAX modes by pressing
the power control button. To switch off the vacuum cleaner, press the On/Off button again.

EMPTYING THE DUST TANK

We recommend emptying the dust tank and cleaning the filters after each cleaning for hygienic
reasons. To empty the dust tank, press the button on its lid and empty the contents into the waste bin.

CLEANING THE HEPA FILTER

Switch off the vacuum cleaner.
•
Release the dust tank (A) and remove it from the body of the vacuum cleaner.
Connect the power supply to the
battery. The battery charge status is
indicated by the battery status indicator
(6) lighting up gradually. Unplug the
charger when it is fully charged. You
can charge the battery either inserted in
the body of the vacuum cleaner or
separately.
Connect the turbo brush to the flexible
tube and then connect the tube to the
body of the vacuum cleaner.
You can connect the vacuuming
attachments directly to the body of the
vacuum cleaner or to a flexible tube.