Panel Features; Tlp Pro 520M Front Panel Features And Operations - Extron electronics TouchLink TLP Pro 520M User Manual

Panel Features

This section describes:
•
•

TLP Pro 520M Front Panel Features and Operations

A
E
Figure 2.
A
B
C
D
A
B
TLP Pro 520M Front Panel Features and Operations
TLP Pro 520M Rear Panel Features and Connections
TLP Pro 520M Bezel (left) and Front Panel without Bezel (right)
Bezel
Communication LED
Motion Sensor
Ambient Light Sensor
Bezel — The TLP Pro 520M ships with a black front bezel in the landscape orientation.
If required, use the included removal tool to detach the bezel (see
Furniture Mounting on page 20). Accessory kits, which must be purchased separately, are
available for white bezels and bezels in the portrait orientation.
Communication LED — Shows the configuration and connection status of the
touchpanel:
Unlit during normal operation (the touchpanel is configured and connected to an
•
IP Link Pro control processor).
• Blinks red if the touchpanel has been configured but is not connected to an
IP Link Pro control processor.
Permanently lit if the touchpanel has not been configured and is not connected to
•
an IP Link Pro control processor.
Use the setup menu (see page 11) to toggle the indicator between enabled and disabled.
C DB
G H
Status Lights
E
LCD Screen
F
Speaker
G
Menu Button
H
Step 11
TLP Pro 520M • Panel Features
F
E
of Wall or
5