Delivery And Dealer Service; Delivery Service; After The First 5 Resp. 8 Hours; After The First 50 Hours - Husqvarna Rider 13 AWD Workshop Manual

DELIVERY AND DEALER SERVICE

Delivery and Dealer Service

Delivery Service

1. Fill the battery with battery acid and charge for
four hours.
2. Fit the steering wheel, seat and, where
applicable, other components.
3. Attach the cutting unit.
4. Adjust the cutting unit:
Adjust the lifting springs (the cutting unit's
"weight" shall be 12–15 kg/26.5–33 lb; if a
brush is to be used, adjust to the maximum
spring tension).
Adjust the cutting unit so that its rear edge is
about 2–4 mm/1/8" higher than its front edge.
Adjust the unit's cutting height, see the
specification.
5. Check that the right amount of oil is in the
engine and transmission.
6. Check and adjust the air pressure in the tyres
(60 kPa / 0.6 bar / 9 PSI).
7. Connect the battery.
8. Fill the fuel tank and start the engine.
9. Check that the machine does not move in
neutral.
10. Check:
Driving forwards.
Reversing.
Engaging the blades.
The safety switch in the seat.
The safety switch in the lifting lever.
The safety switch for the parking brake.
11. Check the engine speed.
12. Bleed the hydraulic system, top up with oil if
necessary.
13. Inform the customer about:
The need and advantages of following the
service schedule.
The need and advantages of leaving the
machine for service every 300 hours.
The effects of service and maintaining a
service journal on the machine's resale value.
Application areas for mulching.
14. Fill in the sales papers, etc.
After the first 5 resp. 8 hours
Briggs & Stratton after 5 hours and Kawasaki after
8 hours.
1. Change engine oil.
After the first 50 hours
1. Change the oil and filter in the transmission.

25-Hour Service

1. Clean the air filter's pre-cleaner (foamed
plastic). (Shorter intervals for dusty operating
conditions.)
2. Clean the engine's cooling air intake and the
transmission's air intake.
3. Check the mounting bolts on the muffler.
4. Clean the fuel pump's air filter (for dusty
operating conditions).
50-Hour Service
1. Perform the 25-hour service.
2. Clean the air cleaner's filter cartridge (paper
filter). (Shorter intervals for dusty operating
conditions.)
3. Check/adjust the cutting height.
4. Check/adjust the parking brake.
5. Inspect the flame proofing/spark arrestor
(extra equipment).
6. Change the engine oil (Briggs & Stratton)
7. Check the synchronisation between the front
and rear wheels.
100/200-Hour Service
1. Perform the 25-hour service.
2. Perform the 50-hour service.
3. Change engine oil.
4. Check whether the engine oil filter needs
changing (every 200 hours). Not Briggs &
Stratton
5. Clean/replace the spark plugs.
6. Change the inline fuel filter.
7. Clean the cooling fins on the engine and the
transmission.
8. Check whether the transmission oil or filter
needs changing (every 200 hours).
9. Replace the air filter's paper cartridge
(Kawasaki every 200 hours).
10. Check nuts and screws for tightness.
11
English-