Table of Contents
Advertisement
DELIVERY AND DEALER SERVICE
Delivery and Dealer Service
Delivery Service
1 Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional equipment.
3 Check and adjust tyre pressure (60 Kpa, 0.6 bar, 9
PSI).
4 Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit
should be 12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is about 2-4 mm
/ 1/8" higher than front edge.
Adjust the cutting unit's cutting height setting so that
the connection rod is tensed at the lowest cutting
height.
5 Check that the right amount of oil is in the engine.
6 Check that there is oil in the transmission's oil tank.
7 Connect battery.
8 Fill with fuel and start engine.
9 Check that machine does not move in neutral.
10 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
The safety switch for the hydrostat pedals.
11 Tell customer about:
Needs and benefits of following the service schedule.
Servicing and the influence of this journal on the
second-hand value of the machine.
The transmission guarantee is only valid if the
synchronisation of the front and rear wheels has been
checked and adjusted in compliance with the service
schedule. The system will be damaged if
synchronisation is not carried out.
Range of applications for BioClip.
Complete proof of sale etc.
After the First 8 Hours
1.
Change engine oil.
2.
Change the oil in the hydraulics and drive
system.
25-Hour Service
1.
Clean the engine's cooling air intake and the
transmission's air intake.
2.
Check the V-belts.
3.
Clean/replace the air cleaner's filter cartridge
(paper filter). (Shorter intervals for dusty
operating conditions.)
4.
Clean the fuel pump's air filter (for dusty
operating conditions).
5.
Check the synchronisation between the front
and rear wheels.
50-Hour Service
1.
Perform the 25-hour service.
2.
Check/adjust the cutting height.
3.
Check/adjust the parking brake.
4.
Inspect the flame proofing/spark arrestor
(extra equipment).
100/200-Hour Service
1.
Perform the 25-hour service.
2.
Perform the 50-hour service.
3.
Change engine oil.
4.
Check whether the engine oil filter needs
changing (every 200 hours).
5.
Clean/replace the spark plugs.
6.
Change the inline fuel filter.
7.
Clean the cooling fins on the engine and the
transmission.
8.
Check whether the oil or filter in the hydraulic
tank need changing (every 200 hours).
9.
Check whether the hydraulic oil filter needs
changing (every 200 hours).
10. Clean the air filter's paper cartridge and check
whether it needs changing (every 200 hours).
11. Check nuts and screws for tightness.
13
English-
Advertisement
Table of Contents
