DELIVERY AND DEALER SERVICE
Checking and Adjusting the Cutting Unit
Performed after checking the tyre air pres-
sures. See "Adjusting the Units Parallellism
and Cutting Height".
Fill with petrol. The engine should be run on
a minimum of 87-octane unleaded petrol (not
mixed with oil). Environmentally-adapted
alkylate petrol can be used to advantage.
Petrol is highly ﬂammable.
Observe caution and ﬁll the tank
Never run the engine indoors, in
enclosed or badly ventilated areas.
Engine exhaust fumes contain
poisonous carbon monoxide.
Starting the engine
Check that the machine is in neutral and is
standing still on ﬂat ground when the parking
brake is released.
Check that the parking brake works.
Check driving forwards (1) and in reverse (2).
Check that the starter motor does not work
when the parking brake pedal is not
Check that the engine stops if the driver
stands from the seat when the parking brake
pedal is unactuated.
Check that the starter does not work when
the cutting unit is in the lower position.
Forward and reverse pedals
Lower the cutting unit