Husqvarna Rider 13 AWD Workshop Manual page 71

6. Release the cable and link rod for the
accelerator from the horizontal arm.
7. Remove the clutch control.
8. Pry off the rear V-belt from the fan pulley.
Place the belt over the groove on the
crankshaft belt pulley and move it
between the fan blades.
9. Remove the five bolts holding the rear
axle and lower the rear axle.
REPAIR INSTRUCTIONS
Mounting bolts left side
Mounting bolts right side
Mounting bolt rear axle
8009-835
8009-837
8009-836
69
English-