Husqvarna Rider 13 AWD Workshop Manual page 89

5. Pry off the pump belt upwards on the
engine pulley.
6. Pry off the pump belt from the pump
pulley. Guide the belt between the fan
blades.
7. Pull the pump belt off of the engine's
pulley and move it under the engine belt
pulleys.
8. Pull out the pump belt through the
opening under the pivot bearing and past
the belt adjuster's disc.
Assembly
9. Pull the pump belt through the opening
under the pivot bearing and on the inside
past the belt adjuster's disc.
10. Fit the pump belt on the engine pulley,
guide it under the engine belt pulleys
and place up its groove.
11. Fit the belt on the pump pulley (between
the fan blades).
12. Fit the pump belt in its groove on the
engine pulley.
13. Press in the belt adjuster and align the
pump belt in position on the belt
adjuster's belt pulley.
14. Check that the centre belt is fitted
correctly on its front pulley and fit the
centre belt on the engine's pulley.
15. Fit the belt guide for the centre belt.
REPAIR INSTRUCTIONS
Pump belt under the engine belt pulley
Pump belt under the engine belt pulley
Belt guide
8009-640
8009-640
8009-736
87
English-