Delivery And Dealer Service; Delivery Service; After The First 8 Hours; 25-Hour Service - Husqvarna Rider 16C AWD Workshop Manual

DELIVERY AND DEALER SERVICE

Delivery and Dealer Service

Delivery Service

1. Charge the battery for 4 hours at
max. 3 amp.
2. Fit steering wheel, seat and any optional
equipment.
3. Check and adjust tyre pressure
(60 Kpa, 0.6 bar, 9 PSI).
4. Adjust cutting unit:
Adjust lift springs (effective weight of
cutting unit should be
12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is
about 2-4 mm / 1/8" higher than front edge.
Adjust the cutting unit's cutting height
setting so that the connection rod is tensed
at the lowest cutting height.
5. Check that the right amount of oil is in the
engine.
6. Check that there is oil in the transmission's
oil tank.
7. Connect battery.
8. Fill with fuel and start engine.
9. Check that machine does not move in
neutral.
10. Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
The safety switch for the hydrostat pedals.
11. Check the engine speed See the Technical
data section.
12. Tell customer about:
Needs and benefits of following the service
schedule.
Servicing and the influence of this journal
on the second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No
outstanding problems. Certified:
________________________________________
Date, mileage, stamp, signature
After the first 8 hours
1. Change engine oil.
2. Change the oil in the gearbox.

25-Hour Service

1. Clean the air filter's pre-cleaner . (Shorter
intervals for dusty operating conditions.)
2. Clean the engine's cooling air intake and the
transmission's air intake.
3. Check the mounting bolts on the muffler.
4. Clean the fuel pump's air filter (for dusty
operating conditions).
50-Hour Service
1. Perform the 25-hour service.
2. Clean the air cleaner's filter cartridge (paper
filter). (Shorter intervals for dusty operating
conditions.)
3. Check/adjust the cutting height.
4. Check/adjust the parking brake.
5. Inspect the flame proofing/spark arrestor
(extra equipment).
6. Change the engine oil
7. Check the synchronisation between the front
and rear wheels.
8.
Check the V-belts
100/200-Hour Service
1. Perform the 25-hour service.
2. Perform the 50-hour service.
3. Change engine oil.
4. Check whether the engine oil filter needs
changing (every 200 hours). Not Briggs &
Stratton
5. Clean/replace the spark plugs.
6. Change the inline fuel filter.
7. Clean the cooling fins on the engine and the
transmission.
8. Check whether the transmission oil or filter
needs changing (every 200 hours).
9. Replace the air filter's paper cartridge
(Kawasaki every 200 hours).
10. Check nuts and screws for tightness.
11. Check the fuel hose. Replace if necessary .
15
English-