Changing The Engine Oil Kawasaki - Husqvarna Rider 13 AWD Workshop Manual

Changing the engine oil Kawasaki

The engine oil should be changed the first
time after 8 hours running time. It should
then be changed after every 100 hours of
running time.
!
WARNING!
Engine oil can be very hot if it is
drained directly after stopping the
engine. Allow the engine to cool
somewhat first.
1. Open the engine cover.
2. Place a container underneath the
engine's left oil drain plug.
3. Remove the dipstick. Remove the drain
plug from the engine's left side.
4. Let the oil run out into the container
(1.5 l/1.6 US qt).
5. Then replace the oil drain plug and
tighten it.
6. Replace the oil filter if necessary.
7. Fill with new engine oil.
8. Starting the engine, run for a few sec-
onds. Check the oil level and top up if
necessary.
IMPORTANT INFORMATION
Used engine oil is a health hazard and
legislation prohibits disposal on the ground
or in nature; it should always be disposed
of at a workshop or appropriate disposal
location. Avoid skin contact; wash with
soap and water in case of spills.
REPAIR INSTRUCTIONS
Engine oil drainage
8009-529
51
English-