Download  Print this page

Replacing The Hydraulic Pump's Drive Belt - Husqvarna Rider 13 AWD Workshop Manual

Hide thumbs

Advertisement

Replacing the hydraulic pump's drive belt

Removal
1.
Remove the transmission cover.
2.
Pry off the belt from the belt adjuster.
3.
Remove the belt guide for the centre
belt.
4.
Pull off the centre belt from the engine's
pulley and pull out the rear section. Used
belt can be pulled downwards. When the
belt is new, the centre belt must be
pulled off of its front pulley whereupon it
can be moved downwards from the
engine pulley so that the rear part can be
pulled out.
86
English-
REPAIR INSTRUCTIONS
Transmission cover
Belt tensioning
Belt guide
Rear part of the front belt
6021-030
8009-839
8009-736
8009-638

Hide quick links:

Advertisement

loading