System; Settings - NovaStar NovaPro UHD User Manual

5.3.1 System

Sync
Click Sync to obtain all the device data, such as the layer data and preset data.
Self-Test
Test whether the currently-connected LED screens can display the images normally with the test patterns.
Test Pattern: Select the image type to be displayed on the screen.

Brightness: Set the brightness of the test pattern displayed on the LED screen.

Space: Set the width of gradient color or the space between test lines. This parameter is configurable when

the test pattern is not a pure color.
Speed: Set the movement speed of the test lines. This parameter is configurable when the test pattern is

lines.
Click Close to exit the self-test settings screen. When a test pattern is displayed on the LED screen, click
Self-Test and select Normal on the self-test screen to close the test pattern.

5.3.2 Settings

Input
Set the input resolution and image quality of the input connector.
Input

Click Input to pop up the input settings screen. The Input tab is selected by default.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
31