Rear Panel - NovaStar NovaPro UHD User Manual

2.2 Rear Panel

Note:
The NovaPro UHD supports replacement of input card. DVI input card is the default configuration. If you need
to change other input cards, please purchase and replace the input card yourself.
Input
Connector
12G-SDI
DP 1.2
HDMI 2.0
HDMI 1.3
Output
Connector
www.novastar.tech
Quantity Description
4 Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-292 (HD)
input signals.
Supports input resolutions up to 4K×2K@60Hz and downward compatibility.
Supports 12G-SDI loop output.
Note:
When the input source is a 12G-SDI signal, it is recommended you
1.
use CANARE / L-4.5CHD+ / UHDTV-SDI SDI cables and the cable
length should be less than 50 m.
12G-SDI connectors 1, 2 and 3 do not support deinterlaced function,
2.
but connector 4 supports the function.
1
Supports input resolutions up to 4K×2K@60Hz (8K×1K@60Hz) and
downward compatibility.
Supports HDCP 1.3.
Does not support interlaced signal inputs.
1 Supports input resolutions up to 4K×2K@60Hz (8K×1K@60Hz) and
downward compatibility
Supports HDCP 1.4 and HDCP 2.2.
Does not support interlaced signal inputs.
Supports HDMI 2.0 loop output.
4 D_4×HDMI 1.3 input card by default
Supports input resolutions up to 1920×1080@60Hz.
Supports HDCP 1.3.
Supports interlaced signal inputs.
The HDMI input card can be changed to other input cards, such as D_4×DVI
input card and D_4×DP 1.1 input card.
Quantity Description
NovaPro UHD All-in-One Controller User Manual
3