Input Settings; Dvi Input Mode; Input Source - NovaStar NovaPro UHD User Manual

All-in-one controller

Hide thumbs Also See for NovaPro UHD:

Table of Contents

Figure 4-20 Capturing

4.5 Input Settings

This menu can be shown and set only when the DVI input card is installed. If no DVI card is installed, this

menu is hidden.

DVI input card supports Single Link and Dual Link modes.

Single Link: 4 × Single link DVI connectors, each with the resolutions up to 1920×1080@60Hz



Dual Link: 2 × Dual-link DVI connector (connectors 2 & 4) , each with the resolutions up to 3840×1080@60Hz



Figure 4-21 Single link mode

Figure 4-22 Dual link mode

The NovaPro UHD supports SDI-1, SDI-2, SDI-3, SDI-4, INPUT1, INPUT2, INPUT3, INPUT4, DP and HDMI

input connectors.

The input source is named after the input connector.

Rotate the knob to select the desired input source and press the knob to enter the input source resolution

menu.

www.novastar.tech

Description

Capture: Save the captured input source image to the selected location.



Note:

If the AUX signal source is set to PGM or PVW and the source for capturing

is PVW or PGM, the AUX display will flicker during BKG capturing.

NovaPro UHD All-in-One Controller User Manual

Table of Contents