Preset Settings - NovaStar NovaPro UHD User Manual

X
Y
Width
Height
Mask
Top
Bottom
Left
Right
Crop
X
Y
Width
Height
Color

Parameter
Brightness
Contrast
Hue
Saturation
Opacity
Monochrome
Invert Colors
Advanced

In Advanced tab, you can set the layer shape, layer flipping and copying. Select a layer in PVW area.
− Shaped: Select a layer shape from the drop-down list.
− Flip: Select Horizontally to flip the output image horizontally. Select Vertically to flip the output image
vertically. Select both Horizontally and Vertically to flip the image both horizontally and vertically
− Copy: Add a new layer according to the copy mode you select.
 None: Do not copy the layer.
 Clone: Add a new layer which is the same as the original one. The two layers are symmetric
horizontally by default.
 Left Mirror: Add a mirrored layer on the left of the original layer. The two layers display mirrored
images.
 Right Mirror: Add a mirrored layer on the right of the original layer. The two layers display mirrored
images.
 X: Set the horizontal initial coordinate of the new layer.

5.3.5 Preset Settings

16 presets are supported in layer configuration. The preset will be saved to the software automatically after
you have set it, which is easier for future use.
www.novastar.tech
Set the horizontal initial position of the layer.
Set the vertical initial position of the layer.
Set the layer's width.
After you click next to Width and Height, the width and height will be increased
or decreased at the ratio of 1:1. After the height reaches the maximum value, only
the width can be changed.
Set the layer's height.
Mask the layer from top to bottom.
Mask the layer from bottom to top.
Mask the layer from left to right.
Mask the layer from right to left.
Set the horizontal initial position for the input source cropping.
Set the vertical initial position for the input source cropping.
Set the width of the output after cropping.
Set the height of the output after cropping.
Description
Adjust the brightness of the output image. The range is 0–100.
Adjust the contrast of the output image. The range is 0–100.
Adjust the gradation or variety of the output image. The range is -180–180.
Adjust the purity or vividness grade of the output image. The range is 0–100.
Adjust the opacity of the output image.
Set the layer image to gray scale image.
Invert the color to its complementary color that combined with the original color
makes white (RGB: 255,255,255). For example, if the original color is red (RGB:
255,0,0), the inverted color is cyan (RGB: 0, 255, 255).
NovaPro UHD All-in-One Controller User Manual
38