Ce Marking - Mitsubishi Electric KD Series User Manual

1-3-1 CE Mark compatibility conditions
(※ When you use the product with the optional Power Supply Unit KDCX24VPW, refer to 1-3-2)
This product is designed to comply with EMC Directive 2014/30/EC of EU legislation.
In order to make this product CE mark compliant, use this product under the following conditions.
① Length of 5V and 24V power supply cables has to be 3m or shorter. Attach ferrite cores
recommended in the following pages with the power supply cables in order to reduce noise
emission. The details of the ferrite cores are explained in the following pages.
② Prepare your power supply dedicated for this product, and supply 5V and 24V power to this
product.
Moreover, this product is designed as an embedded module. When this product shall be installed to the
other equipment, the equipment has to be compliant with the necessary regulation and directives.
This product is complied with the following EMC directives and standards.
EMC directives
Applicable standards
Category of ISM equipment by EN55011: Comply with Group 1, Class A test standard
Class A equipment is regulated to be used under industrial environment. It could be
potentially difficult to assure the electromagnetic compatibility under other
environment. Refer to EN55011 standards for further details.
TM-XH719C

1-3 CE marking

2014/30/EC
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
Immunity EN 61000-6-2：2005 + AC：2005
Emission EN 61000-6-4：2007 + A1：2011
12