INSTALLATION
ELECTRICAL SUPPLY INSTALLATION
Mains power terminals are provided inside the electrical
enclosure, with glands provided for cable entry.
REMOVE LID PANEL TO ACCESS
ELECTRONIC CONTROL BOX
SINGLE PHASE EUROPEAN/AUSTRALIAN COOLER
WIRING ENCLOSURE
Lid
(high voltage access!)
Cover
(low voltage access)
Circulation Pump
Cable Entry Gland
ELECTRICAL COMPONENT SUMMARY
High Voltage:
• Circulation Pump
• Drain Pump (Tornado)
• Motors, supply & exhaust
MAINS INLET
TO CONTROL
ENCLOSURE
ILL2267-A
ILL2267-A
ILL3531-A
ILL3531-A
Drain Pump
Cable Entry
Gland
Supply Cable
Entry Gland (larger)
ILL2268-A
ILL2268-A
low Voltage:
• Inlet solenoid
• 3 pin probe
• Chlorinator
• MS1 BMS Controller or
MagIQcool Wall Control
ELECTRICAL SUPPLY INSTALLATION WIRING
Installation of the cooler must conform to local electrical rules,
regulations and standards.
Mains Connection
Wall control cable connection
Low voltage
connector access
SEELEY INTERNATIONAL - INSTALLATION MANUAL CW-P15 859740-G |
ILL2269-A
RJ 12 for
communications
ILL2270-A
12