Replace Control Electronics - Seeley Climate Wizard CW-P15 Installation Operation & Maintenance

MAINTENANCE INSTRUCTIONS
• Open the clam shell housing of the circulation pump and
unplug the cables, noting the wiring sequence.
• Rewire the replacement circulation pump and reassemble the
clam shell housing.
• Insert the circulation pump spigot into the rubber collar, ensure
that it is fully seated. The application of a smear of lanolin
grease or silicone lubricant will help to assemble the pump.
• Ensure that the cavitation plate (flat, round rubber fitting) is flat
against the floor of the reservoir.
• Replace the screw and rubber hose with hose clamp.
• Restore mains power to cooler.
• Fill tank and check for leaks.

REPLACE CONTROL ELECTRONICS

Purpose:
To replace or service faulty control electronics including the
pressure sensor PCBA, Electrical filters, and the main control
PCBA.
Method:
• Turn off Power to the cooler.
• Remove electronics cover.
ILL3584-A
ILL3584-A
• Unplug all wiring and / or pressure tubes required to remove
PCBA, unscrew PCBA to remove, carefully noting their
positions.
ILL3585-A
ILL3585-A
• Reinstate wiring.
SEELEY INTERNATIONAL - INSTALLATION MANUAL CW-P15 859740-G |
ILL3586-A
ILL3586-A
ILL2921-A
30