Sor-Screen Orientation; Sps-Splash Screen; Sst-Status - Christie D4K40-RGB Technical Reference

SOR–Screen Orientation
Selects the orientation of the displayed image.
Commands
Command Description
SOR <value> Changes the orientation of the displayed
image. This command is only available if
video electronics are on. (Saved value)
Examples
Turn on rear projection:
(SOR 1)
Turn on front projection inverted:
(SOR 2)
SPS–Splash Screen
Changes the characteristics of the displayed splash screen when no signal is present.
Commands
Command Description
SPS+COLR <value> Changes the background color of the splash screen. This command
is only available when video electronics are on. (Saved value)
Examples
Set the splash screen to blue:
(SPS+COLR 3)
SST–Status
Returns status information about the projector in read-only mode.
For more information about the status groups, items, and theirs state, see the D4K40-RGB Status
System Guide (P/N: 020-102975-XX).
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Front projection (Default)
1 = Rear projection
2 = Front projection inverted
3 = Rear projection inverted
Values
1 = Red
2 = Green
3 = Blue
7 = Black (Default)
50