Alc-Ambient Light Correction; Apw-Auto Power On - Christie D4K40-RGB Technical Reference

ALC–Ambient Light Correction
Adjusts the image to help compensate for brighter or darker ambient light conditions.
Commands
Command Description
ALC <value> Adjusts the image to help compensate for
ambient light conditions. This command is
only available if the video electronics are on.
(Saved value)
Examples
Do not adjust the image:
(ALC 0)
Adjust the image for darker environments:
(ALC 50)
APW–Auto Power On
Automatically powers up the projector to the on state if the projector was on when the AC power was
lost.
Commands
Command Description
APW <0 | 1> Automatically powers up the projector to the on
state. (Saved value)
Examples
Turn off auto power:
(APW 0)
Turn on auto power:
(APW 1)
Related information
PWR–Power (on page 46)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = No correction (Default)
1 to 100 = Adjusts the image for darker
environments
-1 to -100 = Adjusts the image for brighter
environments
Values
0 = Disables auto power up
1 = Enables auto power up
14