Sin-Select Input - Christie D4K40-RGB Technical Reference

Examples
Get the state of the shutter:
(SHU?)
Result:
(SHU!0)
Indicates the shutter is open.
Open the shutter:
(SHU 0)
Close the shutter:
(SHU 1)
Enables shutter monitoring:
(SHU+SERV 0)
Disables shutter monitoring:
(SHU+SERV 1)
SIN–Select Input
Selects the active input.
Commands
Command Description
SIN?L Returns a list of available inputs to select based on the
selected port configuration. (Read-only)
SIN <input> Selects a set of inputs based on the selected port
configuration. This command is only available if video
electronics are on. (Saved value)
SIN+PORT <config> Select an input port configuration to use. This command
is only available if video electronics are on. (Saved
value)
Examples
Return a list of available inputs:
(SIN?L)
Use one port to display an image:
(SIN+PORT 1)
Use four DDICs to display a Four-Port Quadrant image:
(SIN+PORT 4)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
—
input = Subject to the range
returned in SIN?L
1 = One-Port (Default)
2 = Two-Port
3 = Four-Port Columns
4 = Four-Port Quadrants
48