Advertisement
Quick Links
CP4400 Series Dual LOS
Pedestal Installation
Instructions
These instructions provide steps to safely install a CP4400 Series projector onto the pedestal. This
pedestal is designed to safely hold CP4400 Series projectors at an adequate height for most projection
rooms.
Affected products
The following products are affected:
•
CP4400 Series projectors
Prerequisites
The following components are required.
•
Christie pedestal kit (P/N: 163-126100-XX)
Required tools
The following tools are required.
•
#3 Phillips screwdriver
•
5 mm flathead screwdriver
•
2.5 mm Allen key
•
3 mm Allen key
•
4 mm Allen key
•
5 mm Allen key
•
24 mm wrench
•
tape measure
Christie CP4400 Series Dual LOS Pedestal Instruction Sheet
020-103141-01 Rev. 1 (06-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
1
Advertisement
Related Manuals for Christie 163-126100 Series
Summary of Contents for Christie 163-126100 Series
- Page 1 • 4 mm Allen key • 5 mm Allen key • 24 mm wrench • tape measure Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
- Page 2 1. Lay the pedestal on its top or side surface. minimum height maximum height Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
- Page 3 2. Raise the top platform, in increments, to the desired height and tilt angle. 3. Reinstall all 16 M6 screws. Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
- Page 4 6. Using proper, safe lifting methods, carefully place the projector on top of the pedestal. Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
- Page 5 11. Tighten the four lock brackets (front foot and back) installed in Step 5. 12. Install and lock the bracket covers onto the foot brackets with the four M5 screws. Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
-
Page 6: Installing External Devices
The procedure below addresses projector preparation for side mounting only; for component mounting instructions, refer to the component OEM instructions directly. Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©... - Page 7 CP4400 Series Dual LOS Pedestal Installation Instructions 1. Unlock the side panels using the provided key. 2. Remove both side panels as shown. Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
- Page 8 1. Place a foot lock bracket over each leveling foot. 2. Secure each bracket to the floor. Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...
-
Page 9: Pedestal Dimensions
Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com • Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com • Christie Managed Services: +1-800-550-3061 or NOC@christiedigital.com Christie CP4400 Series Dual LOS Pedestal Instruction Sheet 020-103141-01 Rev. 1 (06-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©...