Msp-Osd Menu Position Presets; Net-Network Setup - Christie D4K40-RGB Technical Reference

MSP–OSD Menu Position Presets
Sets the default menu position on the screen.
Commands
Command Description
MSP? Returns the current on-screen display position preset.
(Read-only)
MSP <value> Changes the location of the on-screen display.
Examples
Get current menu position preset:
(MSP?)
Set the on-screen display position to the top left corner of the screen:
(MSP 0)
NET–Network Setup
Modifies the network setup for this device.
By default, DHCP support is turned on.
Commands
Command
NET "<ip>" "<subnet>"
"<gateway>"
NET+DGRP "<group>"
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Sets the projector network settings as specified. (Saved
value)
Sets the device group name for the projector. (Saved
value)
This can help simplify broadcast searching by
organizing projectors into groups, particularly if a large
number of projectors are on the same local network.
Serial API commands
Values
—
0 = Top left (Default)
1 = Top center
2 = Top right
3 = Center left
4 = Center
5 = Center right
6 = Bottom left
7 = Bottom center
8 = Bottom right
Values
All three arguments are
strings and the gateway is
optional.
group = Group name for
the projector
43