Ebb-Black Level Blending; Ebl-Edge Blending Selection - Christie D4K40-RGB Technical Reference

(DTL 50)
EBB–Black Level Blending
Selects the black level blend to use on the projector.
Use Twist Pro, Twist Premium, or Mystique to add black level blends to the projector.
Commands
Command Description
EBB+SLCT?L Retrieves a list of available black level
blends. (Read-only)
EBB+SLCT <value> Selects the black level blend to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Examples
Turn off black level blending:
(EBB+SLCT 0)
Retrieve a list of black level blends:
(EBB+SLCT?L)
Select the second black level blend from the list of available blends:
(EBB+SLCT 2)
EBL–Edge Blending Selection
Selects the edge blend to use on the projector.
By default, edge blends are not on the projector. Use Twist or Mystique to add edge blends to the
projector.
Commands
Command Description
EBL+SLCT?L Retrieves a list of available edge blends.
(Read-only)
EBL+SLCT <value> Selects the edge blend to use on the
projector. This command is only available if
video electronics are on. (Saved value)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
—
0 = Turns off black level blending (Default)
1 to 4 = Selects one of the four black level
blends, if available
Values
—
0 = Turns off edge blending
1 to 4 = Selects one of the four edge
blends, if available
26