Serial Api Commands; Adr-Projector Address - Christie D4K40-RGB Technical Reference

Serial API commands

The D4K40-RGB commands can be used to modify product settings.
ADR–Projector Address
Sets or queries the device address.
This command also helps to identify where a response or asynchronous message originates from.
Generally, this command is used for projectors that are daisy-chained together using the RS232 style
communication.
Commands
Command Description
ADR? Checks the current projector address.
(Read-only)
ADR <value> Sets the projector address to <value>.
(Saved value)
Examples
Set all devices to address 0:
(65535 ADR 0)
Set first device at address 0 to address to 5:
(0 ADR 5)
Query address for all devices and return results to address 1001:
(65535 1001ADR?)
Result:
(01001 00005ADR!005)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Values
—
0 to 999
65535 = Reserved broadcast address
13