Cca-Color Adjustment - Christie D4K40-RGB Technical Reference

(BST!000 "--Passed--")
Example of failed tests within the All Tests test suite:
(BST 0)
Result:
(BST!001 "Fail" "no response on pin 1")
(BST!002 "Fail" "no additional details")
(BST!000 "Fail")
Example of failing test 1:
(BST+TEST 1)
Result:
(BST+TEST!001 "Fail" "no response on pin 1")
CCA–Color Adjustment
Configures the color adjustments for the projector.
Use this command to also set the native colors for the projector.
Commands
Command
CCA+COPY <value>
CCA+CTMP <value>
CCA+SLCT <value>
CCA+RDCX <x coordinate for
red>
CCA+RDCY <y coordinate for
red>
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Copies the values from one of the other pre-
defined color tables into the custom color
table. This command is only available if
video electronics are on.
Sets the color temperature of the projector.
This command is only available if the video
electronics are on, the projector is
configured to use Color Temperature for its
color table, and Color Temperature is
selected. (Saved value)
Sets the color table. This command is only
available if the video electronics are on.
(Saved value)
Defines a custom color table using x,y
coordinates, scaled by a factor of 10,000.
For example, an x value of 3350
corresponds to x=0.3350 in the CIE 1931
chromaticity scale.
Serial API commands
Values
0 = Max Drives
1 = Color Temperature
2 = HD Video (ITU-RBT.709)
3200 to 9300
6500 (Default)
1 = Color Temperature—Selects
color adjustments based on a
color temperature
2 = HD Video (ITU-R BT.709)
3 = Custom settings
4 = Auto Detect (Default)
5 = DCI P3
6 = DCI P3 (D65)
The valid range for each value
depends on which of the red/
green/blue point is being
adjusted.
18