Loe-Video Loop Out Enable; Lvo- Lens Vertical Position Adjustment - Christie D4K40-RGB Technical Reference

Set the temperature to Fahrenheit:
(LOC+TEMP 1)
LOE–Video Loop Out Enable
Enables or disables video loop out on the THIC, 3GIC, and TDPIC cards.
Commands
Command Description
LOE <0 | 1> Enables or disables video loop out. This
command is only available if video
electronics are on and it only applies to
option cards that have loop out. (Saved
value)
Examples
Disable video loop out:
(LOE 0)
Enable video loop out:
(LOE 1)
LVO– Lens Vertical Position Adjustment
Sets the lens vertical location to an absolute position.
This command is only enabled when the projector is on.
Commands
Command Description
LVO?m Returns the minimum and maximum range
of the vertical axis based on the last lens
calibration performed. The returned range is
persistent across AC cycles. (Read-only)
LVO <position> Adjusts the vertical location of the lens to
the specified position. This position is
persistent across AC cycles. (Saved value)
Examples
Move the lens to position 500 on the vertical axis:
(LVO 500)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Disables video loop out
1 = Enables video loop out (Default)
Values
—
position = A numeric valuethat is subject to
the range returned in LVO?m
42