Edo-Edid Override; Eme-Enable Asynchronous Serial Messages - Christie D4K40-RGB Technical Reference

Examples
Turn off edge blending:
(EBL+SLCT 0)
Retrieve a list of edge blends:
(EBL+SLCT?L)
Select the second edge blend from the list of available blends:
(EBL+SLCT 2)
EDO–EDID Override
Configures which EDID is presented using inputs that support EDIDs (such as DisplayPort, HDMI, DVI,
and so on).
Use this command to configure what D4K40-RGB advertises regarding the type of signals it accepts.
This command does not need to be set to accept a particular type of signal.
Commands
Command Description
EDO <rate> Defines the expected frame rate regardless of the
active window size of the signal. This command is
only available if video electronics are on. (Saved
value)
Examples
Define the expected frame rate to be 24:
(EDO 24)
Define the expected frame rate to be 60:
(EDO 60)
EME–Enable Asynchronous Serial Messages
Enables or disables the asynchronous serial messages that the projector occasionally transmits.
Commands
Command Description
EME <0 | 1> Enables or disables asynchronous serial
messages. (Saved value)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
24
25
30
50
60 (Default)
Values
0 = Disables all asynchronous FYI/ERR
serial messages
27