Ddd-Disable Dual-Link Dvi Inputs; Def-Factory Defaults - Christie D4K40-RGB Technical Reference

(CUC+H1RX 6798)
Set the y value for point 15:
(CUC+H1RY 3196)
DDD–Disable Dual-Link DVI Inputs
Enables or disables the secondary DVI receiver on all Dual-Link DVI cards.
Commands
Command Description
DDD <0 | 1> Enables or disables the secondary DVI
receiver on Dual-Link DVI cards. This
command is only available if video
electronics are on. (Saved value)
Examples
Enable Dual-Link support:
(DDD 0)
Disable Dual-Link support:
(DDD 1)
DEF–Factory Defaults
Resets D4K40-RGB to its factory default values.
Note the following about this command:
• Resets the network settings to be DHCP enabled.
• Deletes all user profiles, warps, and blends.
Commands
Command Description
DEF 111 Restores all settings to the factory defaults.
To prevent accidental use of this command, the number
111 must follow the command.
Examples
Reset D4K40-RGB to factory defaults:
(DEF 111)
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Enables Dual-Link support (Default)
1 = Disables Dual-Link support
Values
111
24