Gio-General Purpose Input/Output - Christie D4K40-RGB Technical Reference

Examples
Set the base gamma curve function to 2.6:
(GAM 2600)
Set the base gamma curve function to 1.0:
(GAM 1000)
Related information
BGC–Gamma Function (on page 16)
GIO–General Purpose Input/Output
Controls or monitors the state of the general purpose inputs and outputs.
The pins reserved for 12V and ground cannot be read, set, or configured. For a mapping of the IO pins
to the physical connector pins, refer to the D4K40-RGB User Guide (P/N: 020-102958-XX).
Commands
Command
GIO+CNFG?
GIO+STAT?
GIO+STAT "<xxxxxx>"
Examples
Get the status of all the inputs:
(GIO+STAT?)
Result:
(GIO+STAT!"LLLLLLL")
All inputs are low.
Set the status of the general purpose outputs:
(GIO+STAT "HXLHLLL")
Result:
Pins 1 and 4 are set to high; pin 2 has no change; Pins 2, 5, 6, and 7 are set to low.
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Returns the direction for the individual pins.
Returns the status of all inputs. (Read-only)
Gets the state of all inputs or sets the state of all outputs.
This command is only available if video electronics are on.
(Saved value)
Serial API commands
Values
—
—
H = High
L = Low
X = No change
34