Itp-Test Pattern - Christie D4K40-RGB Technical Reference

ITP–Test Pattern
Displays a test pattern.
Commands
Command Description
ITP <index> Enables or disables test patterns.
This command is only available if video electronics are
on.
ITP+FREQ <value> Sets the frequency at which the internal test patterns
are displayed.
This command is only available if video electronics are
on.
ITP+GRDC <0 | 1> Enables multi-color or white-on-black grids for the
Square Grid or Diagonal Grid test patterns.
This command is only available if video electronics are
on.
ITP+GRDM <0 | 1> Enables moving or static grid for the Square Grid or
Diagonal Grid test patterns.
This command is only available if video electronics are
on.
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Off
1 = Grid
2 = Grey Scale 16
3 = Flat White
4 = Flat Grey
5 = Flat Black
6 = Checker
7 = 17 Point
8 = Edge Blend
9 = Color Bars
10 = Multi Color
11 = RGBW Ramp
12 = Horizontal Ramp
13 = Vertical Ramp
14 = Diagonal Ramp
15 = Square Grid
16 = Diagonal Grid
17 = Maximum Activity
18 = Prism/Convergence
19 = FLIR
20 = Focus Fidelity
21 = Boresight
22 = Convergence
23 = Integrator Rod
24 = Flare
2300 to 50000
6000 (Default)
0 = White-on-black
1 = Multi-color (Default)
0 = Static (Default)
1 = Moving
35