Las-Light & Output Settings - Christie D4K40-RGB Technical Reference

Command Description
KEN+HDBT <0 | 1> Enables IR over HDBaseT. (Saved value)
KEN+REAR <0 | 1> Enables or disables the rear IR keypad
sensor. (Saved value)
KEN+WIRE? Returns the current wired jack enabled
state. (Read-only)
KEN+WIRE <0 | 1> Enables or disables the wired keypad sensor.
(Saved value)
Examples
Get the current wired jack enabled state:
(KEN+WIRE?)
Disable the front IR sensor:
(KEN+FRNT 0)
Disable the rear IR sensor:
(KEN+REAR 1)
LAS–Light & Output Settings
Configures the laser drive levels and uses the projector's LiteLOC
Commands
Command Description
LAS+BLUP <value> Changes the blue laser drive level.
LAS+CSRX? Returns the color sensor X reading. (Read-
only)
LAS+CSRY? Returns the color sensor Y reading. (Read-
only)
LAS+CSRZ? Returns the color sensor Z reading. (Read-
only)
LAS+EBLU <0 | 1> Enables or disables the blue laser
LAS+EGRN <0 | 1> Enables or disables the green laser.
LAS+ERED <0 | 1> Enables or disables the red laser.
D4K40-RGB Technical Reference–Serial Commands
020-102972-02 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Disables IR over HDBaseT (Default)
1 = Enables IR over HDBaseT
0 = Disables the rear IR keypad sensor
1 = Enables the rear IR keypad sensor
(Default)
—
0 = Disables the wired keypad jack
1 = Enables the wired keypad jack (Default)
feature.
™
Values
0 to 1000, where 1000 = 100% drive level
635 (Default)
—
—
—
0 = Disables the blue laser
1 = Enables the blue laser (Default)
0 = Disables the green laser
1 = Enables the green laser (Default)
0 = Disables the red laser
37