Pre-Checks; Product Name; Points To Note At Installation; Check Items When Turning Off The Main Power - Canon Super G3 FAX Board-AS Service Manual

Pre-checks

Product Name

Safety regulations require the product's name to be registered. In some regions where this product is sold, the following name
may be registered instead.
• F632501

Points to Note at Installation

• When installing the Super G3 2nd Line Fax Board and this equipment at the same time, after checking "Checking the
Contents", and install them following the Installation Procedure for Super G3 2nd Line Fax Board.
• For "Checking the Operation", refer to this document.

Check Items When Turning OFF the Main Power

Check that the main power switch is OFF.
1. Turn OFF the main power switch of the host machine.
2. Be sure that display in the Control Panel and the lamp of the main power supply are turned off, then disconnect the
power plug.

Installation Outline Drawing

52
6. Installation