Switching Between Raw And Lpr - Canon Color Network Multi-PDL Printer Kit-C1 Service Manual

F-3-77

3.2.11 Switching Between RAW and LPR

Switching Between RAW and LPR
1) Make the following selections:start>Control Panel>Printers and Other Hardware>Printers and Faxes>printer to
open(right click)>Properties>Ports (tab)>(select the desired item; the currently selected printer is
checked)>Configure Port.
2) Specify either operation for RAW procedure under [Raw] and [LPR] within [Protocol] or operation for LPR.
< RAW >
- Type '9100' for [Port Number].
Chapter 3
0005-3104
3-45