Installing The Punch Unit In The Host Machine - Canon Inner Finisher-D1 Installation Procedure

Installation Procedure > Installing the Punch Unit in the Host Machine

Installing the Punch Unit in the Host Machine

1) Hold the parts as instructed in the fi gure and take the punch unit out of the carton box.
2) Remove all the shipping tapes and the packing materials for transport.
3) Remove the punch front cover.
• 2 screws
x2
Installation Procedure > Installing the Punch Unit in the Host Machine
4) Remove the sliding fixture. (Removed sliding fixture and screws are no longer reused.)
• 2 screws
F-1-15
5) Install the punch front cover removed at the step 3) in the punch unit.
• 2 screws removed at the step 3)
F-1-16
x2
x2
8
F-1-17
F-1-18
8