Safety Instructions; General Safety Instructions; Work Activities On Electrical Installations - Bender ISOMETER isoEV425 Manual

2. Safety instructions

2.1 General safety instructions

Part of the device documentation in addition to this manual is the enclosed
"Safety instructions for Bender products".

2.2 Work activities on electrical installations

DANGER
If the device is used outside the Federal Republic of Germany, the applicable
local standards and regulations must be complied with. The European stand-
ard EN 50110 can be used as a guide.
12
Only skilled persons are permitted to carry out the work ne-
cessary to install, commission and run a device or system.
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
An electric shock
 
Damage to the electrical installation
 
Destruction of the device
 
Before installing and connecting the device, make sure that
the installation has been de-energised. Observe the rules for
working on electrical installations.
isoEV425_D00126_09_M_XXEN/03.2019