Measured Value Display And History Memory - Bender ISOMETER isoEV425 Manual

Operation of the device

5.7 Measured value display and history memory

All other measured value displays switch to the standard display (insulation
resistance) after a maximum of 5 min. The pulse symbol indicates a current
measured value. If this symbol does not appear, the measurement is still run-
ning and the latest valid measured value will be displayed. The symbols "<" or
">" will be displayed additionally to the measured value when a response
value has been reached or violated, or the measured value is below or above
the measured range.
isoEV425_D00126_09_M_XXEN/03.2019 37