Safety Instructions; General Safety Instructions; Work Activities On Electrical Installations - Bender ISOMETER isoPV1685RTU Manual

Safety instructions

2. Safety instructions

2.1 General safety instructions

Part of the device documentation in addition to this manual is the enclosed "Safety instruc-
tions for Bender products".

2.2 Work activities on electrical installations.

Only qualified personnel are permitted to carry out the work
necessary to install, commission and run a device or system.
DANGER
If the device is used outside the Federal Republic of Germany, the applicable local stan-
dards and regulations must be complied with. The European standard EN 50110 can be
used as a guide.
isoPV1685xxx_D00007_08_M_XXEN/03.2023
Read the operating manual before starting to mount, connect and
com-mission the device. After successful commissioning, keep the
manual within easy reach for future reference.
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
An electric shock
•
Damage to the electrical installation
•
Destruction of the device
•
Before installing and connecting the device, make sure that the
installation has been de-energised. Observe the rules for working
on electrical installations.
11