Teldat Regesta PLC Installation Manual page 25

Teldat S.A.
3.6.2 Procedure to install the SIM
To insert a SIM card in a tray, locate the retaining flap (fastening with OPEN and LOCK on it) so you can open the
tray and place the SIM card inside. The steps are as follows:
Inserting the SIM
Fig. 20:
Regesta PLC
(1) Push the fastening in the direction indicated by the arrow with the word
OPEN.
(2) Open the upper part of the tray.
(3) Fully insert the SIM card using the guides; the SIM's notch must be on the
right side (as shown).
(4) Return the tray to its original position.
(5) While pressing on the tray, push the fastening towards the word LOCK until
it is firmly in place.
3 Components and Power Supply
21