Teldat Regesta PLC Installation Manual page 16

3 Components and Power Supply
Warning
The connector cover should be in place before the device is powered on.
3.2.2 Installing a DIN rail mount accessory
The Regesta PLC can be installed on a standard DIN rail. A special kit is needed to mount the device on a DIN rail.
This kit must be ordered from the router provider. The DIN rail kit allows the device to be installed in several different
positions.
The kit contains 2 screws to fix the rail mount to the underside of the device. There are two sets of holes on the un-
derside that allow you to place the DIN rail mount in two different positions:
12
Teldat S.A.
Regesta PLC