Advertisement
3 Components and Power Supply
Fig. 12: Holes for wall mounting.
3.3 Power source
The Regesta PLC is powered with an external AC source. Nominal power voltages are 100-240 V AC.
Note
Before connecting the router, please take time to read the following instructions carefully!
3.3.1 Workplace conditions. Main characteristics
• The device should not be placed amongst papers, magazines or other elements that could hinder natural air circu-
lation.
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in
3.3.2 Connecting the power supply
To connect the power supply to the device, please follow the steps set forth in section
14
Connecting
on page 15
andDisconnecting
on page 15.
Connecting
on page 15.
Teldat S.A.
Regesta PLC
Advertisement
Need help?
Do you have a question about the Regesta PLC and is the answer not in the manual?
Questions and answers