Connection To Hacs-Z High Accuracy Decade Capacitor; Figure 3-17: Connection To Hacs-Z Bp Terminals With 1689-9602 Cable And 1894 & 4684 Adapters; Figure 3-18: Connection To Hacs-Z Bp Terminals With 1657-9600 Extender Cable Or 7000-04 Cable (Without Alligator Clips) - IET Labs, Inc. RLC Digibridge 1693 User And Service Manual

3.2.10 Connection to HACS-Z High
Accuracy Decade Capacitor
The HACS-Z has two types of connections: one via
2 bnc connectors and the other via 5 binding posts.
This section shows the connection to both types. It
is important to perform open and short corrections as
described previously in section 3.1.3 for the cables
being used.
HACS-Z DECADE CAPACITOR
Figure 3-17: Connection to HACS-Z BP terminals with 1689-9602 cable and 1894 & 4684 adapters
Figure 3-18: Connection to HACS-Z BP terminals with 1657-9600 Extender Cable
Operation
HACS-Z DECADE CAPACITOR
or 7000-04 cable (without alligator clips)
Connecting to HACS-Z with binding post
terminals
Use one of the following options:
• 1689-9602 (bnc-to-bnc Extender Cable) in
combination with Pomona 1894 & 4684 bnc-
to-banana adapters (see Figure 3-17)
• 1657-9600 Extender Cable or 7000-04
Alligator Clip Leads (see Figure 3-18)
Note that the alligator clips are removed for direct
connection to the binding posts.
0 0
HIGH HIGH
GND
CURRENT SENSE
0 0
HIGH HIGH LOW
GND
CURRENT SENSE SENSE
1693 RLC Digibridge
0
LOW LOW
SENSE CURRENT
0
LOW
CURRENT
25