1693 RLC Digibridge
6. Fasten the bnc connector bracket in the rear
position and the blank bracket in the front
position.
7. Reassemble the instrument and verify nor-
mal operation. To relocate the bnc connec-
tor bracket to the front again, reverse this
procedure.
Figure 5-3: Analog and Control Board Assembly (1689-4702)
120
Figure 5-4: Display Board Assembly (1689-4705)
5.5.2 Major internal components
The following figures show the major internal com-
poenents of the 1693 Digibridges.
Service and Maintenance