IET Labs, Inc. RLC Digibridge 1693 User And Service Manual page 120

1693 RLC Digibridge
Table 3-27: Message activity on IEEE-488 bus during sample example of remote control
*Message on DI01 ...DI08 lines is coded and interpreted differently depending on simultaneous state of A1N line (true =
asserted = low, false = high).
**Bytes 3 and 4 can be programmed in a single command to controller; bytes 8 and 9 similarly. Notice that we refer to
factory- set address as "3" by reading a 5 -bit binary number (lines DI05 .. .DI01).
96 Operation